•Introduction
The product is made of high quality ultra fine particles copolymer emulsion, inorganic nanometer colloid and imported pigments and additives. It is designed for outer walls of the building.
• Features
Strong adhesion; tough coating without powdering and burst phenomenon; resistance to acid rain, water, alkali, ultraviolet and washing; strong masking power, hard to fade; mould-prevent; and diverse colors.
• Instructions
Brushing method: Painting AVS alkali resisting primer first and then AVS durable latex paint
Methods: Using brush, roller, and spray
Recoating time: At least 6 hours (25 ℃)
Consumption: 7m2 /kg for two times (theoretical value).
Wall treatment: Walls should be firm, flat, clean and dry. Start painting after the wall is covered with lacquer putty and polished.
• Packaging
In iron drum, net content: 22kg
• Attention
The product must be stored in 0 ～ 40 ℃ environment and avoid direct sunlight. The best construction temperature is 5 ℃ or above; construction is suggested to stop during the rainfall and forbidden when the temperature is below 0℃. Newly painted walls within 8 hours needed to stay away from water. In case of contact with eyes, rinse immediately with water.